Based on our already very successful Quick Fit System for BSP Threaded Spinwelds, Indac also has a Quick Fit system suitable for Spinweld Caps.
XWS150DWV - 150mm Drain Waste & Vent to AS/NZS 1260 - Hole saw size : 168mm
XWS100SW - 100mm Stormwater AS/NZ 1254 and Drain Waste & Vent AS/NZ 1260 - Hole saw size : 121mm
XWS90SW - 90mm Stormwater AS/NZ 1254 - Hole saw size : 98mm
XWS80SW - 80mm Drain Waste & Vent to AS/NZS 1260 - Hole saw size : 89mm
XWS65SW - 65mm Drain Waste & Vent to AS/NZS 1260 - Hole saw size : 76mm
XWS50SW - 50mm Drain Waste & Vent to AS/NZS 1260 - Hole saw size : 65mm
XWS40DWV - 40mm Drain Waste & Vent - Hole saw size : 52mm
XWS32DWV - 32mm Drain Waste & Vent - Hole saw size : 44mm
SO MANY OPTIONS
There are so many reasons why plastic storage options from INDAC cannot be beaten. They are tough, durable, light-weight and super-strong.
FROM BINS TO ULLAGE
Being based in Marlborough, it would be pretty difficult for INDAC to not be involved in the Wine & Viticulture industries.
It all started when one of the largest wineries in the region started using INDAC fish bins to hand-pick grapes into.
View/download the latest Vineyard brochure (PDF).
THE NEW ZEALAND HOT TUB
The true New Zealand Portable Hot Tub - use it at home or take it anywhere.
GET YOU, AND YOUR CATCH, HOME SAFE
INDAC have worked in conjunction with Harrison to produce one of the most versatile and safest "catch" boats available on the New Zealand market.
YOUR ULTIMATE DIVE MATE
The INDAC Self-Contained Boat for Snorkel Divers has become the Industry Standard in New Zealand for snorkel divers
PLASTIC PRODUCTS BROUGHT BACK TO LIFE
Today plastics are found in practically every single product imaginable. The common misconception is that when plastic is damaged, cracked, broken,or missing pieces, it's garbage. This couldn't be further from the truth. More than ever people now know that glues and epoxies don't really work and are a temporary solution at best.
ABOUT A BUCKET
It started with a bucket. The Indac 20 Litre heavy duty long life Bucket has been manufactured as a cost effective alternative to a stainless steel bucket. It is ideal for the rigours of life on farm, viticulture, and horticulture use.
XWS25PP - 25mm Pressure Pipe to AS/NZ 1477.2 - Hole saw size : 44mm
EzyTap 20mm Fitting - Hole saw size : 35mm
EzyTap 32mm Fitting - Hole saw size : 44mm
EzyTap 25mm Fitting - Hole saw size : 41mm
EzyTap 40mm Fitting - Hole saw size : 57mm
EzyTap 50mm Fitting - Hole saw size : 70mm
The Indac 26 Litre Stack and Nest Bin is sometimes referred to as the Harvesting Bin. It is more durable than the equivalent injection moulded alternatives.
SOFT TECHNOLOGY THAT HITS SCRAP HARD!
Supavent is a one-way vent that fits into venting holes in moulds. It replaces the need for other materials usually inserted in these holes and gives better, more consistent results.
SMALL, BUT OH SO SMART!
Smartvent is a partial one-way vent that fits into venting holes in moulds. Removing the need for other materials formerly used in these holes, Smartvent speeds the sintering process by reducing porosity, improving surface finish and potentially reducing cycle times.
TAKING THE GUESSWORK OUT OF MOULDING!
Used solo, Supavent and Smartvent have been providing the rotational moulding industry with improved pressure regulation and passive pressurisation of moulds. Technovent provides a simple method of attaching low pressure compressed air lines to moulds, allowing moulders to control and effectively mounts thermocuple probes, giving far more accurate internal temperatue measurements.
The Indac Net Reel has been developed to assist with the retrieval, storage, and application of bird netting in vineyards. It is suitable for side row, over row, and multi row netting.
The introduction of overhead vine stripping requires the installation of a secure retaining system for the top wire. The VSR (Vine Stripper Retainer) button has been developed to give the holding power to resist the 160kg plus pull exerted by the mechanical strippers.
With the growth in the introduction of mechanical stripping and the drive to minimise vineyard expenditure the ECONO clip has been developed by INDAC working alongside vineyard
managers and drivers of stripping machines.
The Indac Post Cap has been developed to prevent netting from being snagged on wooden posts in the vineyard. It is ideal for either single or multi row netting.
INDAC’s Ullage float is used to fill the void that occurs when wine is transported in a tanker; they push the fluid levels up creating less slack in the tank which stabilises the tanker, and lessens the chance of oxidation. Such a simple solution to a complex problem.