Pin It

Based on our already very successful Quick Fit System for BSP Threaded Spinwelds, Indac also has a Quick Fit system suitable for Spinweld Caps.

 

The Quick Fit system has been designed to avoid the need to change router bits whether fitting Indac BSP Threaded Spinwelds or Indac Spinweld Caps. We have also designed the caps for ease of application and to cover a range of sizes. The cap driver pushes onto the router bit and the Spinweld Cap locks onto the cap driver using the centre pin.

FEATURES 

The features of using the Quick Fit system for Spinweld Caps result in the following advantages for the end user:

  • Less opportunity for operator error as the fitting is visible throughout the Spinweld operation.
  • No damage to the product surface from the router bit during the fitting of the Spinweld as the cap driver is inside the maximum diameter of the fitting.
  • Reduced time fitting router bits (one steel router bit fits all sizes of the Spinweld Cap Drivers and the Driver Plugs fitted to the BSP Threaded Spinwelds)Lower set up costs (the Router Bits are considerably cheaper)
  • Router bits are less prone to damage.

DIMENSIONS

The following sizes are available:

Code

Description

Recommended for Holes

XSWCP015

S/Weld Cap   0-15mm

0-15mm

XSWCP1525

S/Weld Cap 15-25mm 

15-25mm

XSWCP2535

S/Weld Cap 25-35mm 

25-35mm

XSWCP3545

S/Weld Cap 35-45mm 

35-45mm

XSWCP4555

S/Weld Cap 45-55mm 

45-55mm

XSWCP5565

S/Weld Cap 55-65mm

55-65mm

XSWCP100 S/Weld Cap 80-100mm 80-100mm

Line Drawings

Spinweld Vent Caps 0 100mm line drawing

Download the brochure 75x60 t0-100mm Line Drawing (PNG)

Download the brochure 75x60 tSpinweld Caps Line Drawing (PDF)

3-D Model

Download the brochure 75x60 t3D Model (PDF)

Spinweld Vent Caps
SKU Spinweld_Vent_Caps_57